Safety Checklist Before Going For A Long Bike Ride

Having a motorbike can be quite exciting. However, there are some things you need to be on the lookout for if you’re going on a long trip with your motorbike. This is a checklist so that you can avoid any accidents or having your bike die on you. Even if you have taken trips that lasted a couple of hours on the road, it is important to constantly check whether there is an issue with your bike so that you can face it before you or someone else gets hurt.

1. Be Prepared With A Contingency Plan

Unfortunately, no one can predict if they are going to be involved in an accident on the road or not. Even after checking all of the bike parts and making sure that you stay within the speed limit, you can never account for others’ driving when on the road. This is especially true when you’re in bigger cities like New York, Los Angeles or Houston, where motorcyclists account for a very large percentage of accidents. Based on what Houston motorcycle accident lawyer Joe Stephens says, not only are motorcyclists in danger because they are unprotected in comparison to those in a car, but they are often faced with negative responses from their insurance companies as well as others due to the fact that they ride motorcycles. Keeping vigilant out on the road is just as important as checking your bike before a trip.

2. Tires

Checking your tire pressure is quite important when you are planning to go on a long trip. This is doubly important if your trip is going to be in the summer when the hot weather causes the air inside your tires to expand. Basically, during the summer you want your tires to not be filled too much with air or you might face a tire blowing while on the road.

3. Brakes

Brakes are an integral part of your bike that can lead to fatalities if it is not working properly. Make sure that you check your brakes a couple of times before you take the bike out for a long ride. When you take stops, regularly check them to make sure that the ride did not leave them in bad shape. Make sure that before you even press the brake handle, the indicator lights come on. This is important because it will alert any vehicle behind you that you are about to use the brakes and thus avoid a collision.

You also need to check the brake pads while you are checking the brakes. If they are squealing, do not just cover them with lubricant and call it a day. Squealing brakes means that the pads are worn down and need to be replaced as soon as possible.

4. Fluids

Just like with a car, a motorcycle’s engine needs to be cooled down so that it does not overheat or catch fire. Make sure that you cooling fluids in their tanks and that there are no leaks. Be careful to check for oil and fuel leaks because they may cause you serious problems down the road.

Now that you have this checklist, you can go on the road knowing you did your best to keep yourself and those around you safe while on the road. Remember to always have a contingency plan and find resting stops in advance. That way, wherever you are, you can get help if you need it at any point on the road.

Leave a Reply

Your email address will not be published. Required fields are marked *