- How to Change the Transmission Fluid
- Regularly Maintaining Your Transmission Fluid
- What Type of Transmission Fluid to Use
- Common Signs That It’s Time to Change
- How Often Should You Check and Replace
- Your Transmission Isn’t Working Properly
- Synthetic vs Conventional Transmission Fluid
- Different Types of Additives for Performance
How to Change the Transmission Fluid in a 2014 Ford Fusion
Regularly changing the transmission fluid in a 2014 Ford Fusion is an important part of regular vehicle maintenance. It helps to keep the transmission running smoothly and efficiently and can help to extend its life. This guide will provide step-by-step instructions on how to change the transmission fluid in a 2014 Ford Fusion.
Before beginning, it is important to make sure that you have all of the necessary supplies on hand. You will need new transmission fluid (that’s especially if you notice issues such as milky transmission fluid), a funnel, a drain pan or bucket, and some rags or paper towels for cleaning up any spills.
Step 1: Park your car on level ground and set the parking brake firmly. Make sure that your engine is off before proceeding with any further steps.
Step 2: Locate the transmission dipstick under your hood near the firewall on the driver’s side of your engine compartment. Pull out this dipstick and check its reading; if it reads “Full” then you do not need to add more fluid at this time; if it reads “Low” then you should add more fluid before continuing with these instructions (see Step 4).
Step 3: Place your drain pan or bucket underneath where you will be draining out old fluid from (this is usually located near where you found your dipstick). Unscrew this plug using an appropriate wrench or socket set; be careful not to strip it as this could cause leaks later on down the line. Once unscrewed, allow all of the old fluid to completely drain out into your container before moving on to Step 4 below.
Step 4: If needed, use a funnel to pour new transmission fluid into where you just removed the old from (make sure that it matches what type was previously used). Re-screw the plug back in tightly once done adding the new liquid – again be careful not to strip threads. Wipe away any excess liquid with rags/paper towels as needed before moving on to Step 5 below.
Step 5: Replace the dipstick back into its original position and check the reading one last time – if still reads “Low” then repeat Steps 3 & 4 until the desired level has been reached. Once done here, start up the car engine for a few minutes so that newly added liquid can circulate throughout the system properly before shutting off again afterward (this helps ensure proper lubrication throughout the entire system.).
Congratulations – You have now successfully changed out old transmission oil in the 2014 Ford Fusion. Be sure to keep track of when the next service interval should occur so that future maintenance can be performed accordingly as well.
If you want to learn more, check out our explainers on whether should you change the transmission fluid on high-mileage cars, as well as how often should you change the transmission fluid, and whether should I change the transmission fluid after 100k miles.
Benefits of Regularly Maintaining Your 2014 Ford Fusion’s Transmission Fluid
Regularly maintaining the transmission fluid in your 2014 Ford Fusion is essential for ensuring that your vehicle runs smoothly and efficiently. Transmission fluid helps to lubricate the components of the transmission, allowing them to move freely and without friction.
It also helps to cool down these components, preventing them from overheating and potentially damaging other parts of the car. When you regularly maintain your 2014 Ford Fusion’s transmission fluid, you can help extend its life expectancy by reducing wear and tear on its internal components.
This will save you money in costly repairs or replacements down the line. Additionally, regular maintenance can help improve fuel efficiency by reducing drag on engine parts caused by old or dirty transmission fluid. This means that you will be able to get more miles out of each tank of gas while also helping reduce emissions from your vehicle.
Finally, regularly maintaining your 2014 Ford Fusion’s transmission fluid can help ensure a smoother ride overall as it allows for smoother shifting between gears when driving at different speeds or up hills or inclines. This makes for a safer driving experience as well as a more comfortable one for both driver and passengers alike.
In conclusion, regular maintenance of your 2014 Ford Fusion’s transmission fluid is essential for keeping it running smoothly and efficiently while also helping extend its life expectancy and improving fuel efficiency along with providing a safer driving experience overall.
What Type of Transmission Fluid Should You Use in a 2014 Ford Fusion?
The 2014 Ford Fusion requires the use of Mercon LV transmission fluid. This type of fluid is specifically designed for use in vehicles with 6-speed automatic transmissions, such as the 2014 Ford Fusion.
It is important to note that Mercon LV should not be used in place of any other type of transmission fluid, as it could cause damage to the vehicle’s transmission system. Additionally, it is important to check your owner’s manual for specific instructions on how often and how much transmission fluid should be added to your vehicle.
Signs That It’s Time to Change the Transmission Fluid in Your 2014 Ford Fusion
It is important to regularly check and change the transmission fluid in your 2014 Ford Fusion. This will help ensure that your vehicle runs smoothly and efficiently. Here are some common signs that it is time to change the transmission fluid:
1. Unusual noises coming from the transmission: If you hear any unusual noises coming from the transmission, such as grinding or whining, it may be a sign that the fluid needs to be changed.
2. Slipping gears: If you notice that your car is slipping out of gear or having difficulty shifting, this could indicate a problem with the transmission fluid.
3. Leaking fluid: If you notice any leaking fluids under your car, this could be an indication of a problem with the transmission fluid as well. It’s crucial to diagnose a transmission fluid leak, or if you experience the symptoms of low transmission fluid.
4. Burning smell: A burning smell coming from under your hood can also indicate a problem with the transmission fluid and should not be ignored as it can cause further damage if left unchecked for too long. So, be wary if you notice any burnt transmission fluid, or if the color of your transmission fluid is a bit off.
By paying attention to these signs and changing your vehicle’s transmission fluid when necessary, you can help ensure that your 2014 Ford Fusion runs smoothly for years to come.
How Often Should You Check and Replace the Transmission Fluid in a 2014 Ford Fusion?
It is recommended that the transmission fluid in a 2014 Ford Fusion be checked and replaced every 30,000 miles or 24 months, whichever comes first. This should be done to ensure that the transmission is running smoothly and efficiently.
During this service, the technician will check for any signs of wear or damage to the transmission system and replace any worn parts as needed. Additionally, they will drain out all of the old fluid and replace it with new fluid to help keep your vehicle running at its best.
To learn more about checking the transmission fluid, you can refer to our detailed write-ups on when to check the transmission fluid, as well as how to check the transmission fluid, and whether to check the transmission fluid when it’s hot or cold.
Troubleshooting Tips for When Your Ford Fusion’s Transmission Isn’t Working Properly
If your 2014 Ford Fusion’s transmission is not working properly, there are a few troubleshooting tips you can try before taking it to a mechanic.
- First, check the transmission fluid level. Low fluid levels can cause shifting problems and other issues with the transmission. If the fluid level is low, top it off with the correct type of fluid for your vehicle. But at the same time, it’s a bad idea to add too much transmission fluid to your car.
- Next, inspect all of the external components of the transmission such as hoses and lines for any signs of leaks or damage. If any leaks or damage are found, they should be repaired immediately to prevent further damage to the transmission system.
- If these steps do not resolve your issue, you may need to have your vehicle scanned for trouble codes using an OBD-II scanner tool. This will help identify any potential problems that may be causing your issue with the transmission system.
- Finally, if none of these steps resolve your issue with your 2014 Ford Fusion’s transmission system, it is best to take it to a qualified mechanic who can diagnose and repair any underlying issues that may be causing this problem.
Pros and Cons of Synthetic vs Conventional Oil for Your Ford Fusion’s Transmission Fluid
When it comes to the transmission fluid for your 2014 Ford Fusion, you have two main options: synthetic oil or conventional oil. Each type of oil has its own advantages and disadvantages, so it is important to understand the pros and cons of each before making a decision.
- The primary advantage of using synthetic oil in your 2014 Ford Fusion’s transmission fluid is that it offers superior protection against wear and tear. Synthetic oils are designed to be more resistant to heat, which helps reduce friction between moving parts in the transmission system. This can help extend the life of your vehicle’s transmission by reducing wear and tear on its components over time. Additionally, synthetic oils tend to last longer than conventional oils, meaning you won’t need to change them as often.
- On the other hand, there are some drawbacks associated with using synthetic oil in your 2014 Ford Fusion’s transmission fluid. For one thing, synthetic oils tend to be more expensive than conventional oils due to their higher-quality ingredients and manufacturing processes. Additionally, some people may find that their vehicles don’t respond as well when using a synthetic oil compared with a conventional one; this could lead to reduced performance or even damage if not addressed quickly enough.
- Ultimately, whether you choose synthetic or conventional oil for your 2014 Ford Fusion’s transmission fluid will depend on several factors such as budget constraints and personal preference regarding performance levels desired from your vehicle’s engine system overall. It is important that you weigh all these considerations carefully before making a decision so that you can ensure optimal performance from your car for years down the road.
Different Types of Additives for Performance with Your 2014 Ford Fusion’s Transmission Fluid
The transmission fluid in your 2014 Ford Fusion is an essential component of the vehicle’s performance. It helps to lubricate and cool the internal components of the transmission, allowing it to shift smoothly and efficiently.
However, over time, this fluid can become contaminated or degraded, leading to decreased performance and increased wear on the transmission components. To ensure that your vehicle continues to perform at its best, it is important to use additives that can help enhance its performance.
One type of additive that can be used with your 2014 Ford Fusion’s transmission fluid is a friction modifier. This type of additive helps reduce friction between moving parts within the transmission system by creating a thin film on their surfaces. This reduces wear on these parts and allows them to move more freely for improved shifting performance.
Another type of additive that can be used with your 2014 Ford Fusion’s transmission fluid is an anti-foaming agent. This type of additive helps prevent air bubbles from forming in the fluid which can cause shifts to become sluggish or jerky as well as increase wear on internal components due to lack of lubrication.
Anti-foaming agents also help keep contaminants suspended in suspension so they don’t settle out onto sensitive surfaces where they could cause damage or clog small passages within the system. Finally, detergents are another type of additive that can be used with your 2014 Ford Fusion’s transmission fluid for enhanced performance benefits.
Detergents help keep contaminants suspended in suspension so they don’t settle out onto sensitive surfaces where they could cause damage or clog small passages within the system while also helping remove deposits from internal components which may have built up over time due to normal wear and tear or contamination from outside sources such as dirt particles entering through seals or gaskets during operation.
By using these types of additives with your 2014 Ford Fusion’s transmission fluid you will be able to improve its overall performance while also extending its life span by reducing wear on internal components caused by friction and contamination buildup over time.
Q: What type of transmission fluid does the 2014 Ford Fusion use?
A: The 2014 Ford Fusion uses Mercon LV Automatic Transmission Fluid.
These tools have been tried and tested by our team, they are ideal for fixing your car at home.